Unable to mount

[0cococ]

Operating System

Windows 11

Arduino IDE version

1.8

Board

esp32s3

ArduinoCore version

1

TinyUSB Library version

3.3

Sketch as ATTACHED TXT

Compiled Log as ATTACHED TXT

#include <Adafruit_TinyUSB.h>

// 单一报告（无 ID）描述符
uint8_t const desc_hid_report[] = {
TUD_HID_REPORT_DESC_MOUSE()
};

// USB HID 对象
Adafruit_USBD_HID usb_hid;

void setup() {
// Manual begin() is required on core without built-in support e.g. mbed rp2040
if (!TinyUSBDevice.isInitialized()) {
TinyUSBDevice.begin(0);
}
Serial.begin(9600);
// Set up HID
usb_hid.setBootProtocol(HID_ITF_PROTOCOL_MOUSE);
usb_hid.setPollInterval(2);
usb_hid.setReportDescriptor(desc_hid_report, sizeof(desc_hid_report));
usb_hid.setStringDescriptor("TinyUSB Mouse");
usb_hid.begin();
// If already enumerated, additional class driverr begin() e.g msc, hid, midi won't take effect until re-enumeration
if (TinyUSBDevice.mounted()) {
TinyUSBDevice.detach();
delay(10);
TinyUSBDevice.attach();
}

Serial.println("Adafruit TinyUSB HID Mouse example");

}

void process_hid() {
// 如果 HID 准备好了
if (usb_hid.ready()) {
uint8_t const report_id = 0; // 无 ID
int8_t const delta = 5; // 移动步幅
usb_hid.mouseMove(report_id, delta, delta); // 模拟向右和向下移动
}
}

void loop() {
#ifdef TINYUSB_NEED_POLLING_TASK
TinyUSBDevice.task();
#endif

if (TinyUSBDevice.mounted()) {
    Serial.println("Device mounted successfully.");
    return;
} else {
    Serial.println("Device not mounted.");
}
// 每100毫秒移动一次鼠标
static uint32_t ms = 0;
if (millis() - ms > 100) { // 调整时间间隔来改变移动频率
    ms = millis();
    process_hid();
}

}

What happened ?

How to reproduce ?

Unable to mount

Debug Log

No response

Screenshots

[manny4u67]

You will have to add this to your platformio.ini to enable OTG which is required for TinyUSB. @0cococ

Keep in mind that now you will need to hold boot and press reset to program the ESP32-S3

build_flags = 
	-DUSE_TINYUSB=1
	-DARDUINO_USB_MODE=0
	-DARDUINO_USB_CDC_ON_BOOT=1
lib_archive = no

More resources for you 👍
https://community.platformio.org/t/esp32-s3-tinyusb-config-not-working/34209/11
https://github.com/adafruit/Adafruit_TinyUSB_Arduino/blob/master/examples/HID/hid_boot_keyboard/hid_boot_keyboard.ino