My moto e 2014 bricked #6
-
|
My moto e 2014 bricked in edl mode it all started when my motorola moto e 2014 was good and one day I installed the sbl1 partition by mistake and it bricked me please help me |
Beta Was this translation helpful? Give feedback.
Replies: 21 comments
-
|
@Vicc2008 Have you tried the steps that are already mentioned? |
Beta Was this translation helpful? Give feedback.
-
|
But i wanted to install Windows phone 8.1 to my moto e 2014 |
Beta Was this translation helpful? Give feedback.
-
Yes but i get errors |
Beta Was this translation helpful? Give feedback.
-
@Vicc2008 Make sure you have met all prerequisites and requirements. |
Beta Was this translation helpful? Give feedback.
-
|
In my case is a qualcomm snapdragon msm8210 and Android 5.1 Lollipop |
Beta Was this translation helpful? Give feedback.
-
|
But i wanted to install Windows phone 8.1 to my moto e 2014 |
Beta Was this translation helpful? Give feedback.
-
@Vicc2008 If your phone is bricked, you need to unbrick it first. Also, I no longer have a Moto E with me to experiment and this project is no longer maintained. You might want to check the following which is what worked years ago for many people:
|
Beta Was this translation helpful? Give feedback.
-
|
In my case my model is a XT1021 |
Beta Was this translation helpful? Give feedback.
-
@Vicc2008 Works on XT1022, XT1021 and XT1025 as mentioned here. |
Beta Was this translation helpful? Give feedback.
-
|
I need a blank-flash for the xt1021 but with the UEFI |
Beta Was this translation helpful? Give feedback.
-
@Vicc2008 I'm sorry, I no longer have a Moto E with me nor am I maintaining or supporting this project any longer. The Moto E is an old phone now. This was like a hobby for me 4 years ago or so and not anymore. You are free to go through the stuff I have put up here and XDA, the links which I have given you already. But beyond that, I don't have anything to say. |
Beta Was this translation helpful? Give feedback.
-
|
or with thor2 from Windows device recovery tool |
Beta Was this translation helpful? Give feedback.
-
@Vicc2008 The |
Beta Was this translation helpful? Give feedback.
-
|
but from cmd |
Beta Was this translation helpful? Give feedback.
-
@Vicc2008 CMD method is here: https://github.com/aravindvnair99/Motorola-Moto-E-XT1022-condor-unbrick/blob/main/Unbrick%20methods.md#method-5-fastboot
|
Beta Was this translation helpful? Give feedback.
-
|
But in edl mode |
Beta Was this translation helpful? Give feedback.
-
|
With blank-flash |
Beta Was this translation helpful? Give feedback.
-
|
Beta Was this translation helpful? Give feedback.
@Vicc2008 If your phone is bricked, you need to unbrick it first. Also, I no longer have a Moto E with me to experiment and this project is no longer maintained. You might want to check the following which is what worked years ago for many people: