Compare source - November 19, 2024 at 5:37 PM PST
Compare source - August 22, 2024 at 9:55 PM PDT
Compare source - February 27, 2024 at 2:16 PM PST
30d65c3
- Disable minorDependencyUpdates by default and set rangeStrategy to "replace" for all npm dependencies (Thanks @ecraig12345!)
Compare source - December 28, 2023 at 12:38 PM PST
cfc530c
- groupEslint: don't group typescript-eslint with other eslint packages (Thanks @ecraig12345!)
Compare source - October 18, 2023 at 3:43 PM PDT
157ab35
- disableEsmVersions: add strip-ansi (Thanks @ecraig12345!)
Compare source - September 11, 2023 at 4:46 PM PDT
-
#138
280a87d
-keepFresh
: Reduce noise from unnecessary lock file-only dep updates (Thanks @ecraig12345!) -
#138
280a87d
-restrictNode
: enableconstraintsFiltering
to prevent installing deps with incompatibleengines.node
(Thanks @ecraig12345!)
- #138
280a87d
- Restrict npm package-specific presets to only apply to npm deps (Thanks @ecraig12345!)
Compare source - May 2, 2023, 6:18 PM PDT
c61116a
- groupJest: include more packages and disable related built-in presets (Thanks @ecraig12345!)
Compare source - May 2, 2023, 6:03 PM PDT
10807ea
- RemoverangeStrategy: "bump"
for dependencies from default preset. This is more similar to the v1 behavior. (Thanks @ecraig12345!)
Compare source - May 2, 2023, 3:36 PM PDT
3384bbe
- Add groupLageBackfill preset (Thanks @ecraig12345!)
a54b42d
- dependencyDashboardMajor: correctly specify 0.x versions (Thanks @ecraig12345!)
Compare source - May 1, 2023, 8:46 PM PDT
5f11999
- default: Use "bump" instead of "replace" fordependencies
(Thanks @ecraig12345!)
Compare source - May 1, 2023, 8:33 PM PDT
f6f77e3
- keepFresh: For lockFileMaintenance, rebase when behind the base branch (Thanks @ecraig12345!)
Compare source - May 1, 2023, 3:44 PM PDT
m365-renovate-config
version 2 (9a9f133
) makes the default preset a bit more opinionated based on testing, streamlines preset naming, and updates settings to better reflect recent improvements in Renovate.
These changes have been picked up automatically unless you specified a ref (e.g. #v1
) as part of the preset names in your extends
config.
Note: <m365>
in preset names referenced below is a shorthand for github>microsoft/m365-renovate-config
. This is just for readability of the readme and will not work in actual configs (you must use the full repo prefix).
The default preset (github>microsoft/m365-renovate-config
) is now a bit more "opinionated" and includes the settings that were previously defined in <m365>:libraryRecommended
. These settings can be disabled either individually or using the excludePresets
option.
The dependency version update strategy (rangeStrategy
) has also changed as described below.
Deprecated presets still exist for now to avoid immediate breaks in consuming repos, but will be removed in version 3.
<m365>:libraryRecommended
is deprecated in favor of this repo's default preset.<m365>:beachballLibraryRecommended
is renamed to<m365>:beachball
.
Previously, Renovate's config:base
would pin devDependencies
and possibly also dependencies
to exact versions. Pinning dependencies
is not desirable for libraries, so v1
of m365-renovate-config
omitted any pinning behavior in its default preset, and enabled pinning only devDependencies
in its <m365>:libraryRecommended
preset.
A recent Renovate update included greatly expanded support for doing in-range updates (e.g. updating the installed version for "foo": "^1.0.0"
from 1.1.0
to 1.2.0
) by changing only the lockfile. Therefore, Renovate's default rangeStrategy: "auto"
was changed to do lockfile-only updates when possible (instead of pinning or replacing versions), and config:base
no longer includes any pinning of versions.
Since the lockfile-only updates are likely a good strategy for devDependencies
in most repos, m365-renovate-config
's default preset (which supersedes <m365>:libraryRecommended
) has been updated as follows:
- Use
rangeStrategy: "replace"
fordependencies
(production) to reduce the chance of breaks for library consumers. - Remove overrides (use
rangeStrategy: "auto"
) for other dependency types.
To restore the previous behavior of <m365>:libraryRecommended
, extend the Renovate preset :pinOnlyDevDependencies
.
Compare source - April 28, 2023, 4:07 PM PDT
077edb3
- Testing new release setup (Thanks @ecraig12345!)
Compare source - April 27, 2023 at 9:17 PM GMT-7
0a8f68e
- More release updates (Thanks @ecraig12345!)
Compare source - April 27, 2023 at 8:53 PM GMT-7
433d88d
- More changelog fixes (Thanks @ecraig12345!)
Compare source - April 27, 2023 at 8:42 PM GMT-7
674a4ca
- Changeset fixes (Thanks @ecraig12345!)
Compare source - April 27, 2023 at 8:38 PM GMT-7
c33c229
- Release using changesets (Thanks @ecraig12345!)
Compare source (2023-04-19)
- include more dep types in groupFixtures (ec07661)
1.8.7 (2023-04-13)
- remove renovate from scheduleNoisy (198e004)
1.8.6 (2023-03-10)
1.8.5 (2023-02-21)
1.8.4 (2022-09-21)
- add
@microsoft/api-extractor
to noisy packages rule (99ac22c)
1.8.3 (2022-09-16)
- disableEsmVersions: add ansi-regex (9e8c1f4)
1.8.2 (2022-09-13)
- default: run schedules relative to pacific time (89616d0)
1.8.1 (2022-09-13)
- groupTypes: only run in early morning (3e59a57)
1.8.0 (2022-09-12)
- add groupD3 (bf79e31)
1.7.3 (2022-09-12)
- disableEsmVersions: add pretty-bytes (ccbc878)
1.7.2 (2022-09-10)
- groupNodeMajor: remove broken engines rule (5875670)
1.7.1 (2022-09-10)
- disableEsmVersions: add supports-color (39cfa94)
- groupNodeMajor: bump node version in engines (f22bee7)
1.7.0 (2022-09-09)
- restrictNode: add more ways of specifying node version (5f138e8)
- add groupNodeMajor (92a8bdc)
1.6.0 (2022-09-09)
- add disableEsmVersions (bfbe09f)
1.5.0 (2022-09-09)
- add groupYargs file (8ff7423)
- add groupYargs (9eb24ec)
1.4.2 (2022-09-09)
1.4.1 (2022-09-09)
- exclude 0.x from groupTypes (f0f3a1b)
1.4.0 (2022-09-09)
- add restrictNode (538ba0c)
1.3.0 (2022-09-09)
- add groupTypes (f1eba61)
1.2.0 (2022-09-06)
- add beachballLibraryVerbose (12fa211)
1.1.0 (2022-09-01)
- keepFresh: remove unnecessary updateNotScheduled setting (480d161)
- add scheduleNoisy preset (f880ddb)
1.0.4 (2022-09-01)
- keepFresh: allow wider schedule for lock file updates (22c4317)
1.0.3 (2022-09-01)
- use correct option name yarnDedupeFewer in keepFresh (03fdab8)
1.0.2 (2022-09-01)
- update keepFresh to use yarnDedupeFewest (a166eef)
1.0.1 (2022-08-25)
- update react monorepo config to extend default group (139741f)
- Add config and build files (3c698d3)