Let's Sipeed up, Maximize AI's power!
MaixPy, makes AIOT easier!
Maixpy is designed to make AIOT programming easier, based on the Micropython syntax, running on a very powerful embedded AIOT chip K210.
K210 brief:
- Image Recognition with hardware acceleration
- Dual core with FPU
- 8MB(6MB+2MB) RAM
- 16MB external Flash
- Max 800MHz CPU freq (see the dev board in detail)
- Microphone array(8 mics)
- Hardware AES SHA256
- FPIOA (Periphrals can map to any pins)
- Peripherals: I2C, SPI, I2S, WDT, TIMER, RTC, UART, GPIO etc.
Find I2C devices:
from machine import I2C
i2c = I2C(I2C.I2C0, freq=100000, scl=28, sda=29)
devices = i2c.scan()
print(devices)Take picture:
import sensor
import image
import lcd
lcd.init()
sensor.reset()
sensor.set_pixformat(sensor.RGB565)
sensor.set_framesize(sensor.QVGA)
sensor.run(1)
while True:
img=sensor.snapshot()
lcd.display(img)See Releases page
Get latest commit firmware: master firmware
Doc refer to maixpy.sipeed.com
See build doc
The historic version see historic branch (No longer maintained, just keep commit history)
See LICENSE file
In addition to the source code of the MaixPy project, since MaixPy exists as a component, it can be configured to not participate in compilation, so this repository can also be developed as C SDK. For the usage details, see Building Documentation, which can be started by compiling and downloading projects/hello_world.
The compilation process is briefly as follows:
wget http://dl.cdn.sipeed.com/kendryte-toolchain-ubuntu-amd64-8.2.0-20190409.tar.xz
sudo tar -Jxvf kendryte-toolchain-ubuntu-amd64-8.2.0-20190409.tar.xz -C /opt
cd projects/hello_world
python3 project.py menuconfig
python3 project.py build
python3 project.py flash -B dan -b 1500000 -p /dev/ttyUSB0 -t