bardjs Test Helpers

bardjs is a small library of functions to help you write Angular v.1.x application tests ... whether you write them in mocha or jasmine or QUnit.

What kind of help? Help with routine tasks that would otherwise clutter your tests and obscure their intent.

The poster child in this respect is the inject method. It can easily remove 10 or more lines of boilerplate so you spend less time with setup and more time with your tests. Check it out.

The bardjs repo also contains code snippets to make writing tests a little easier. See separate instructions for those below.

Installation

Most folks bardjs install it with bower or npm:

bower install bardjs

npm install bardjs

You can also clone bardjs from github and extract bard.jsitself.

bard depends on sinon.js so make sure you have that library available; bower and npm bring that down for you.

Almost all of bard is in the bard.js file within the dist folder.

If you're running tests in a browser, add the appropriate script tag below the script for your test framework library:

<!-- when installed with bower -->
<script src="/bower_components/bardjs/dist/bard.js"></script>

<!-- when installed with npm -->
<script src="/npm_modules/bardjs/dist/bard.js"></script>

You'll need to add sinon.js as well

<!-- when installed with bower -->
<script src="/bower_components/sinon/index.js"></script>

<!-- when installed with npm -->
<script src="/npm_modules/sinon/lib/sinon.js"></script>

karma considerations

If you're running with karma, reference bard.js in karma.config.js among the files to be loaded. See the karma "Config" documentation for details.

Be sure to include sinon among the karma frameworks as in this example extract:

frameworks: ['mocha', 'chai', 'sinon', 'chai-sinon'],

In the dist folder you'll also find optional plug-in extensions such as the bard-ngRouteTester.js which adds the bard.ngRouteTester helper to manage tests of the original Angular router.

bard methods

After loading bard.js, you'll find the global variable bard at your finger tips as you write your tests.

The bard methods are listed right at the top of the bard.js file.

We won't describe every method here. Each method is prefaced in the code with it own documentation in comments describing both purpose and usage.

But we will call out the methods that have proven most notable and useful:

appModule - identify the application module to test and also disable certain routine services.
asyncModule - enable async integration testing by restoring $http and $q while identifying the application module to test.
inject - inject angular and application components and store them by name on the global window object.
fake services - register disabled services that you can spy on.
log - writes messages to console when bard debugging is turned on.
mockService - create a mock for any service with spies and return values for every service member.

appModule

Identify the application module to test and also disable certain routine services.

You typically identify the application module that defines the component you want to test and its dependent services at the top of a test suite. You do this with the angular.mock.module function.

We found that we routinely disable certain services at the same time.

For example, we don't want to see toastr messages in our browser while our tests are running. We may need to assert that toastr was called in a particular way but we'd prefer to hide the toasts themselves.

We also discovered that routing services can fire when the app module loads and trigger failures that have nothing to do with the subject of our tests. We just want routing to go away.

The bard appModule method is a quick way to both identify the module to test and disable the toastr and routing services. This one line ...

beforeEach(bard.appModule('myModule'));

does the work of these seven ...

beforeEach(angular.mock.module(
	'myModule',
	bard.fakeToastr,
	bard.fakeRouteHelperProvider,
	bard.fakeRouteProvider,
	bard.fakeStateProvider)
);

The bard library offers several methods (all beginning with the word "fake") that each disable a particular service. Don't worry if you haven't included all or any of these services in your app. Registering them will be harmless. Not using toastr? Not using the UIRouter? No problem.

Like the angular.mock.module function, you can add configuration arguments to the call to decorate or mock other services:

beforeEach(bard.appModule('myModule', someDecorator, someMock));

don't use appModule when testing routes

You can't use bard.appModule and test the router. For example, if you want to know that a controller would route the user to a particular view, you can't use bard.appModule. There is no way to "unfake" the router service once it's been faked.

Instead, simply fall back to angular.mock.module, adding specific fakes as desired:

beforeEach(module('myModule', bard.fakeToastr));

asyncModule

Enable async integration testing by restoring $httpBackend and $q while identifying the application module to test.

The angular.mock.module function replaces $httpBackend and $q with mocked versions.

The mocked $httpBackend prevents $http from issuing the AJAX calls necessary to communicate with a remote service. The mocked $q requires a manual digest cycle to "flush" the promise queue and prevents event-driven promise fulfillment.

These mocks are great for testing asynchronous behaviors with fast synchronous tests. But you can't write integration tests that require interactions with a server while these mocks are in play.

For example, you can't test that a dataservice works as expected when it sends requests to the remote data server. You can simulate how you think that server will respond. But what if the real server behaves differently than your simulation? How can you confirm that your dataservice continues working even after changes to the backend that you don't even know about?

You'll want at least a few cross-process, truly asynchronous integration tests for peace of mind. You can't have them while $httpBackend and $q are mocked.

The bard asyncModule method restores the original $httpBackend and $q at the same time that you identify the application module under test. Here's how you might call it:

beforeEach(bard.asyncModule('app'));

This is the equivalent of ...

beforeEach(module('app', bard.$httpBackendReal, bard.$qReal, bard.fakeToastr));

The bard library's $httpBackendReal and $qReal restore the original angular $httpBackend and $q implementations; they may be invoked independently.

We're also faking toastr for the same reason we faked it in appModule.

Now you write asynchronous tests that look a lot like production code. Here's a mocha example:

it('should get at least 6 Avengers', function (done) {
    dataservice
        .getAvengers()
        .then(function(data) {
            expect(data).to.have.length.above(6);
        })
        .then(done, done);
});

You should see network traffic for the request and response to the "Avengers" query. The promise succeeds (or fails) in real time, without stimulus from $rootScope.$apply(). The test framework pauses and waits until the server responds (or timesout) and the final then invokes the test harness' done function. Only then will it proceed to the next test in the suite.

Like the angular.mock.module function, you can add configuration arguments to decorate or mock other services:

beforeEach(bard.asyncModule('app', someDecorator, someMock));

inject

Inject angular and application components and store them by name on the global window object.

The bard.inject method tells the Angular mock dependency injector to inject components for the currently active test.

Here's how you might use inject within a beforeEach to get five dependent services while testing an Angular controller:

bard.inject(this, '$controller', '$log', '$q', '$rootScope', 'dataservice');

Now you can refer to these services by name in subsequent test functions as in these examples:

var controller = $controller('Avengers');
sinon.stub(dataservice, 'getAvengers').returns($q.when(avengers));
$rootScope.$apply();
expect(dataservice.getAvengers).to.have.been.calledOnce;
expect($log.error.logs[0]).to.match(/doomed/);

Compare the simplicity of

bard.inject(this, '$controller', '$log', '$q', '$rootScope', 'dataservice');

to the typical approach without bard:

// declare local variables for use within subsequent test functions
var $controller, $log, $q, $rootScope, dataservice;

// inject the services using Angular "underscore wrapping"
beforeEach(inject(function(_$controller_, _$log_, _$q_, _$rootScope_, _dataservice_) {
    // wire local vars to the injected services
    $controller = _$controller_;
    $log = _$log_;
    $q = _$q_;
    $rootScope = _$rootScope_;
    dataservice = _dataservice_;
}));

Which would you rather write? As importantly, which would you rather read ... on your way to the important business of the tests themselves?

"but globals are bad"

It's a terrible idea to toss variables into the global namespace in production.

It's tactically smart, productive, and convenient to do so in your tests. Disagree? Do you write your test code with beforeEach, it, expect, and module? Or would you rather write with the annoyingly verbose equivalents: mocha.beforeEach, jasmine.it, chai.expect and angular.mock.module?

the main risk of globals is cross-test pollution, the risk that the values you set in one test will carry over to a later test. Fortunately, bard inject deletes these variables from the global namespace at the end of each test. Each new test gets a clean slate.

what is `this`?

Notice the this argument in

bard.inject(this, '$controller', '$log', '$q', '$rootScope', 'dataservice');

Test frameworks set this to the test context (the spec context) object when the test runs. If we pass the context to inject, it can tell the test framework to ignore the new injected variables that it adds to the global namespace (the window object).

Do you care? You will care if you fear that your application code is leaking variables to the global namespace. You might then configure the test framework to detect such leaks.

For example, mocha has a "checkLeaks" configuration option that you can turn on like so:

<script>
    mocha.checkLeaks();
    var runner = mocha.run();
</script>

Thus enabled, mocha fails any test that adds variables to the global namespace between the time the test starts and when it finishes.

That's a problem for bard.inject which always adds new variables to globals. We don't want the tests to fail because of bard.inject.

Fortunately, inject can tell mocha to ignore the injected variables if we give it the spec context via this.

Internally inject calls another bard function, addGlobals. You should call this too if you deliberately extend globals yourself.

You don't have to pass this to inject if you aren't checking for global leaks. You are free to omit it as in:

bard.inject('$controller', '$log', '$q', '$rootScope', 'dataservice');

Of course you'll regret the omission later should you decide to turn on mocha's global leak checking. We think it's prudent to include this in your call.

inject a function

The angular.mock.inject function can both retrieve injectable "services" and do things with them in the function body.

The bard inject method accepts the same kind of function which may be useful if you want to inject and do work at the same time. For example:

beforeEach(bard.inject(function($controller, $log, $q, $rootScope, dataservice) { 
    ... do work ..
}));

After the function completes, bard inject promotes the injected services to global variables.

fake services

Register disabled services that you can spy on.

Our applications often depend on certain specific services that we like to disable during most of our tests.

Bard offers fake versions of these services. Their methods names begin with the word "fake" and include:

fakeLogger
fakeRouteHelperProvider
fakeRouteProvider
fakeStateProvider
fakeToastr

Look for details in bard.js. They all have two features in common:

they do nothing
their function members are stubbed with sinon spies

The spies allow a test to assert that one of the service methods was called in the expected manner.

expect(toastr.error).to.have.been.calledWith('uh oh!');

You typically register these faked services by including them among the arguments to the angular.mock.module function or one of its bard substitutes:

beforeEach(module('myMod', bard.fakeLogger));
beforeEach(appModule('myMod', bard.fakeLogger));
beforeEach(asyncModule('myMod', bard.fakeLogger));

log

The bard log method writes messages to console when bard debugging is turned on.

Our tests generally don't write to the console because the console is usually hidden when running tests in the browser or is crowded with other messages when running in karma.

But it can be helpful to sprinkle a little console logging in our code when trying to understand and debug complex tests.

it('should be good', function() {
    ... tricky stuff that might not work ...
    bard.log('we got the goods');    // conditional bard logging
    ... more tricky stuff ...
    expect(good).to.match(/good/);
});

We may wish to leave such diagnostic logging behind ... inert for the most part but ready to go again in a future visit. We can turn conditional logging on with bard.debugging(true) and off again with bard.debugging(false). When debugging is off, calls to bard.log do nothing.

Some of bard's own methods call bard.log.

mockService

Quickly create a mock for any service with spies and return values for every service member.

It can be painful to mock a dependency with a large API. Suppose, for example, that our app has a dataservice with 30 members. We want to test a particular controller that depends on this service.

That controller might call any of the service methods, either during initialization or when subjected to test conditions. For this round of tests, we only care when it calls the dataservice.getAvengers method.

No matter what the controller does, the dataservice must not dispatch requests to a server. It's obviously terrible if the controller calls a missing method and the mock blows up. We'll have to mock every dataservice member ... and remember to update it as the dataservice evolves.

Such a mock dataservice is tedious to write by hand, especially when we don't care what most of the members do. The bard mockService makes writing this fake a lot easier. The entire setup could be as simple as:

beforeEach(function() {

    bard.appModule('app.avengers');
    bard.inject(this, '$controller', '$q', '$rootScope', 'dataservice');


    bard.mockService(dataservice, {
        getAvengers: $q.when(avengers),
        _default:    $q.when([])
    });


    controller = $controller('Avengers');
    $rootScope.$apply();
});

The details of mockService configuration are described in bard.js. You'll find usage examples in the test coverage (look for ~/tests/bard.mockService.spec.js).

We trust you can see the core ideas in this example:

you give mockService an instance of the real dataservice to act as a template.
the mockService replaces every dataservice member with a fake implementation.
all methods are stubbed with sinon spies.
you can supply return values (such as fulfilled promises) for specific methods.
you determine default return values for the remaining unspecified methods.

In this case, we arranged for the getAvengers method to return a resolved promise with fake "avenger" objects. The other 29 methods return a resolved promise with an empty array.

That's easier to write and read than a mock dataservice with thirty hand-coded stub methods.

And here are two mocha/chai tests that could follow that setup:

it('controller activation gets avengers', function() {
    controller.activate(); // calls `dataservice.getAvengers`
    $rootScope.$apply();   // flush pending promises
        
    expect(controller.avengers).to.have.length(avengers.length); // same number as mocked

    expect(dataservice.getAvengers).to.have.been.calledOnce; // it's a spy
});

// Call one of the default mock methods which should return 
// a promise resolving to an empty array
// Note that the controller would not have called this on its own
it('can call fake `dataservice.getNews`', function() {

    dataservice.getNews().then(function(news) {
        expect(news).to.have.length(0);
    });

    $rootScope.$apply(); // flush pending promises

    // verify that `getNews` is actually a spy
    expect(dataservice.getNews).to.have.been.calledOnce;
});

Brackets code snippets

Code snippets make test authoring just a little easier. Here are instructions for loading our snippets into the Brackets editor.

Open the Brackets Extension manager ( File > Extension manager )
Install 'Brackets Snippets (by edc)'
Click the light bulb in Brackets' right gutter
Click Settings and then Import
Click Choose File
Locate and download ~/snippets/brackets-testing-snippets.yaml from github.
Choose either to skip or to override
Click Start Import

Now try them in a JavaScript test file

mocha/jasmine
- bdescribe - mocha/jasmine describe
- bit - it test (synchronous)
- bait - async it test
- bbeforeEach - mocha/jasmine beforeEach
- bafterEach - mocha/jasmine afterEach
- bdone - tail of a mocha test promise chain: .then(done, done);
chai expectations
- bexpect - expect(...).to
- bcalled - expect(...).to.have.been.called
- bequal - expect(...).to.equal(...)
- blen - expect(...).to.have.length(...)
- bmatch - expect(...).to.match(/.../i)
- bprop - expect(...).to.have.been.property(..., ...)
- bthrow - expect function to throw
bard.js
- binject - bard.inject
- bcinject - bard.inject for a controller
- bmodule - bard.appModule
- basyncmod - bard.asyncModule
- bverify - bard.verifyNoOutstandingHttpRequests()
angular.js
- bapply - $rootScope.$apply();
- bwhen - $httpBackend.when('get', {url}).respond({status}, {data});
- bflush - $httpBackend.flush();
miscellaneous
- bfn - generates a function stub

Name		Name	Last commit message	Last commit date
Latest commit History 77 Commits
dist		dist
snippets		snippets
tests		tests
.editorconfig		.editorconfig
.gitignore		.gitignore
.jscsrc		.jscsrc
.jshintrc		.jshintrc
CHANGELOG.md		CHANGELOG.md
LICENSE		LICENSE
README.md		README.md
bard-ngRouteTester.js		bard-ngRouteTester.js
bard.js		bard.js
bower.json		bower.json
gulp.config.js		gulp.config.js
gulpfile.js		gulpfile.js
index.html		index.html
package.js		package.js
package.json		package.json

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

bardjs Test Helpers

Installation

karma considerations

bard methods

appModule

don't use appModule when testing routes

asyncModule

inject

"but globals are bad"

what is `this`?

inject a function

fake services

log

mockService

Brackets code snippets

About

Releases

Packages

Contributors 5

Languages

License

wardbell/bardjs

Folders and files

Latest commit

History

Repository files navigation

bardjs Test Helpers

Installation

karma considerations

bard methods

appModule

don't use appModule when testing routes

asyncModule

inject

"but globals are bad"

what is this?

inject a function

fake services

log

mockService

Brackets code snippets

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Contributors 5

Languages

what is `this`?

Packages